Kenwood Blend Xtract SB055WG: blender specifications and how to use it correctly + customer reviews

Kenwood blenders are quite popular. The models of this brand are designed for various purposes - from kneading dough to grinding products.

The company's blender cases are made of cast aluminum, which makes them strong and durable, as well as resistant to various types of damage. The engine is protected against overload and overheating.

Most sets are equipped with bowls that do not absorb odors - made of heat resistant glass.

Kenwood Blend Xtract SB055WG

A specific model is stationary and has small dimensions. Its power is not very large - 300 watts.

A tall bowl with a 200 milliliter handle is firmly fixed to the mechanism. Sharp knives and 2 power modes easily handle a small number of products.

The kit includes a screw cap on the bowl with a hole for drinking. This allows you to use the bowl as a container for consumption and storage of the finished product, without the need for transfusion / shifting it to another container. The design is very easy to clean.

It is also worth noting that the design expands to the bottom, and the legs are equipped with rubber pads. This makes the blender as stable as possible and does not allow it to move on the surface during operation.

Blender functions

The main function of Blend Xtract is whipping cocktails.

For grinding large and solid products, its capacity is not enough.

Therefore, its use is not very extensive - preparation:

• smoothie
• cocktails;
• necks.

In addition, one of the functions of this device is the ability to use its sets as utensils for consumption.

Specifications

Advantages and disadvantages

Equipment

Included:

• 2 container containers for 0.5 liters;
• 2 lids per bowl;
• 4 stainless steel knives.

detailed instructions

Before using a blender, be sure to read the instructions, as well as safety measures.Only then can work begin.

Safety

Before working with the device, you should perform such actions:

1. Remove the blender from its packaging.
2. Get rid of all labels and stickers.

Otherwise, follow these instructions.:

• Unplug the appliance after use.
• Do not use a defective blender.
• Protect the unit, plug and wire from moisture.
• Do not use accessories not intended for this appliance.
• Do not leave the included blender unattended.
• Do not remove the bowl until the blade unit stops completely.
• Do not mix hot ingredients in the appliance.
• Do not touch the sharpened edge of the knives.
• Do not place the appliance near hot objects or hot household appliances (including a stove).
• Place the blender only on a flat surface.
• Use the appliance for its intended purpose only.

Using

1. Initially load dimensional, dense products (ice cream, ice, fruit, etc.) into the blender.
2. If you need to add liquid ingredients, add them last.
3. Do not add ingredients above the maximum mark.
4. Take the knife block by the lower part and tighten it tightly on the bowl (turn clockwise until it clicks).
5. Shake to evenly distribute ingredients.
6. Place the bowl on the power supply.
7. Turn the mug until it clicks and matches the mark on the block and bowl.
8. Turn the knob to the required power.
9. Wait for the products to grind to a uniform consistency.
10. After mixing the ingredients and obtaining the necessary consistency, turn the power lever to the “off” mark.
11. Wait for the blade unit to stop completely.
12. Turn the mug counterclockwise and remove it from the power supply.
13. To remove the knife block, turn the bowl over and while holding it, turn the block counterclockwise.
14. Install and lock the cover by turning it clockwise.
15. In order to use the mug for drinking, open the special casement on the lid.

Good to know

• The contents of a full mug are enough for about 2 servings.
• A glass with a prepared drink can be kept in the refrigerator.
• To drink through the lid, the drink should not be too thick.
• For a more fluid consistency of the drink, there is a special blender mode (intermittent).
• It is forbidden to mix dry products.
• It is forbidden to turn on an empty blender.
• A bowl not removed from the power unit cannot be used as a storage system.
• It is forbidden to exceed the indicated volume, as some products increase in volume during the whipping process.
• Do not turn on the device for longer than 30 seconds. to extend its performance.
• It is forbidden to whip large frozen foods (you must cut them or divide into parts).

Care and cleaning

• Before cleaning, be sure to unplug the appliance.
• Disassemble the device.
• Do not immerse the power unit and the cord with the plug in water.
• Wash the appliance immediately after use.
• Do not wash any parts of the appliance in the dishwasher.
• The power supply can be wiped with a slightly damp cloth.
• When washing the knife block, do not touch sharp elements.
• Do not immerse the knives under water, just wipe them in soapy hot water, and then rinse.
• The knife block should be dried upside down
• The mug and lid must be washed manually with soapy water and then rinsed clean.
• Dry the lid and the bowl also stands upside down.

What to look for when buying?

When choosing a device, it is necessary to check its operability, as well as the possibility of whipping in both modes. You should also pay attention to the equipment.

It is important that the appliance is not damaged.. It is necessary to inspect the power supply and make sure that it is working and has no visible damage.Make sure that the bowl is not cracked and the knife block snaps tightly onto it.

Knives should be sharpened and not bent.

Customer reviews

{{reviewsOverall}} / 5 Owners rating (5 votes)

Brand / Model Rating

Number of Voters

Sort by: LatestHighest scoreMost helpfulWorst rating

Be the first one to leave a review.

Verified

{{{review.rating_title}}}

{{{review.rating_comment | nl2br}}}

show more

{{pageNumber + 1}}

Price range

Prices for this model range from 3,500 to 4,000 rubles.

Useful video

From the video you will learn how the Kenwood Blend Xtract SB055WG blender works: